I typically hollow a deep ale bowl, for example, using a progression of gouges from straight to bent to spoon-bent. Only the spoon-bent can hog https://lovebeautytraining.com/table-sander/ away so deeply and even undercut walls. Similar hollows, like those of kuksas—deeply hollowed drinking cups—also call for the spoon-bent gouge.
I find it useful for accurate splits across large rounds of wood. But you can get the same effect with a line of wooden wedges you’ve made yourself. Once again the second hand market came through for me.
Sloyd Knife
With the Stubbs I just use it like a conventional knife. I would use a 1″ ball monster carbid bit on a die grinder. Then finish it with a 1″ flap sanding wheel. If I was going to go with a gouge it would be a 1″ short bent spoon in a #7 sweep to gouge the depth and a 1/2″ back bent #3 sweep to finish the inside walls. I also have a Denny spoon gouge, it is an excellent tool. I bought two hirsch gouges #7 one is 14mm the other is 35mm.
Narex 3 Piece Spoon Carving Set With Gouge, Double Edge Hook Knife And Carving Knife
This is one of the spoons I made and the gouges I currently have. I grabbed an old buck brothers No. 7 sweep 19 mm gouge from ebay for about $15 bucks. A lot less cost to entry than a new Hirsch or Pfeil.
Shop
Our biweekly podcast allows editors, authors, and special guests to answer your woodworking questions and connect with the online woodworking community. A block plane is a tool that you’ll use daily in the shop. Here’s some advice on buying one for the long haul. After sketching on layout lines for the tapering flutes, Fisher uses the #5 gouge to gently pare the channels. As the lines draw closer together, he cuts more shallowly, which narrows the flute.
For some small bowls, a narrower #5 may be a better option, but for most the curve of this gouge will negotiate the hollow without the corners digging in. The second number indicates–usually in millimeters–the width of the cutting edge. Widths can be as narrow as 3 mm and as wide as 50mm or more. Wood carving tool sets for beginners frequently include a 6mm gouge, an 8mm gouge, a 10mm gouge, and a 20mm gouge.